AS NZS 4024-2019 Series

Description

AS NZS 4024 Series – 2019 Edition – Safety of machinery

AS/NZS 4024:2019 Series, Safety of machinery standards, contains 26 Parts that are European (EN) and Internationally-based (ISO) safety and design Standards with some modifications to meet Australia’s tough safety practices and regulations. The series provides designers, manufacturers, suppliers, employers and users of machinery with guidelines to help reduce the risks of working with, or near, machinery.

Contents

• AS 4024.1100:2019, Safety of machinery, Part 1100: Application guide
• AS/NZS 4024.1201:2014, Safety of machinery, Part 1201: General principles for design – Risk assessment and risk reduction
• AS/NZS 4024.1204:2019, Safety of machinery, Part 1204: Electrical equipment of machines – General requirements (IEC 60204-1:2016 (ED. 6.0) MOD)
• AS/NZS 4024.1302:2019, Safety of machinery, Part 1302: Risk assessment – Reduction of risks to health from hazardous substances emitted by machinery – Principles and specifications for machinery manufacturers
• AS/NZS 4024.1303:2014, Safety of machinery, Part 1303: Risk assessment – Practical guidance and examples of methods
• AS/NZS 4024.1401:2014, Safety of machinery, Part 1401: Ergonomic principles – Design principles – Terminology and general principles
• AS 4024.1501-2006, Safety of machinery, Part 1501: Design of safety related parts of control systems – General principles for design (Reconfirmed, 2014)
• AS 4024.1502-2006, Safety of machinery, Part 1502: Design of safety related parts of control systems – Validation (Reconfirmed 2014)
• AS/NZS 4024.1503:2014, Safety of machinery, Part 1503: Safety-related parts of control systems – General principles for design
• AS/NZS 4024.1601:2014, Safety of machinery, Part 1601: Design of controls, interlocks and guarding – Guards – General requirements for the design and construction of fixed and movable guards
• AS/NZS 4024.1602:2014, Safety of machinery, Part 1602: Interlocking devices associated with guards – Principles for design and selection
• AS 4024.1603-2019, Safety of machinery, Part 1603: Design of controls, interlocks and guards – Prevention of unexpected start-up
• AS/NZS 4024.1604:2019, Safety of machinery, Part 1604: Design of controls, interlocks and guarding – Emergency stop – Principles for design (ISO 13850:2017 (ED.3.0), MOD)
• AS/NZS 4024.1701:2019, Safety of machinery, Part 1701: Human body measurements – Basic human body measurements for technological design
• AS/NZS 4024.1702:2014, Safety of machinery, Part 1702: Human body measurements – Principles for determining the dimensions required for openings for whole body access into machinery
• AS/NZS 4024.1703:2014, Safety of machinery , Part 1703: Human body measurements – Principles for determining the dimensions required for access openings
• AS/NZS 4024.1704:2014, Safety of machinery, Part 1704: Human body measurements – Anthropometric data
• AS/NZS 4024.1801:2014, Safety of machinery, Part 1801: Safety distances to prevent danger zones being reached by upper and lower limbs
• AS/NZS 4024.1803:2019, Safety of machinery, Part 1803: Safety distances and safety gaps – Minimum gaps to prevent crushing of parts of the human body
• AS/NZS 4024.1901:2014, Safety of machinery, Part 1901: Displays, controls, actuators and signals – Ergonomic requirements for the design of displays and control actuators -General principles for human interactions with displays and control actuators
• AS/NZS 4024.1902:2014, Safety of machinery, Part 1902: – Displays, controls, actuators and signals – Ergonomic requirements for the design of displays and control actuators – Displays
• AS/NZS 4024.1903:2014, Safety of machinery, Part 1903: Displays, controls, actuators and signals – Ergonomic requirements for the design of displays and control actuators – Control actuators
• AS/NZS 4024.1904:2014, Safety of machinery, Part 1904: Displays, controls, actuators and signals – Indication, marking and actuation – Requirements for visual, auditory and tactile signals
• AS/NZS 4024.1905:2014, Safety of machinery, Part 1905: Displays, controls, actuators and signals – Indication, marking and actuation – Requirements for marking
• AS/NZS 4024.1906:2014, Safety of machinery, Part 1906: Displays, controls, actuators and signals – Indication, marking and actuation – Requirements for the location and operation of actuators
• AS/NZS 4024.1907:2014, Safety of machinery, Part 1907: Displays, controls, actuators and signals – System of auditory and visual danger and information signals

General Product Information:

Edition	1st Edition
Document Type	PDF
Document Language	English
ISBN
Pages
Publisher	Standards Australia(AS)
Status	Current